Products - HF Ballast Controllers

Controllers for use with fluorescent and incandescent lighting fixtures fitted with electronic 1-10V, DSI or DALI dimmable ballasts or transformers.
	fixture coupler
	DMBC110 - HF Ballast Fixture Coupler • 230V 50/60Hz single phase & neutral supply at 10A • 1 x relay output at 10A (inductive) • 1 x output selectable to: DALI Broadcast, 1-10V, DSI • DALI Ballasts and transformers: 5, 0-10V: 10mA source or 20mA sink DSI Ballasts and transformers: 15 • 1 x RS485 serial port - DyNet & DMX512 • Dimensions L 185mm x W 4mm x D 38mm • Packed weight 0.19Kg Your browser does not support inline frames or is currently configured not to display inline frames.
	DIN Rail mount
	DDBC100-DALI - DALI HF Ballast Controller • 230V 50/60Hz single phase & neutral supply at <0.1A • 1 x DALI control output, supporting a full DALI universe of 64 channels, including backward channel • Diagnostics include; - Lamp failure reporting - Ballast failure reporting - Ballast run time tracking for each ballast - Device Online/Offline status • Dimensions H 86mm x W 105mm x D 58mm • Packed weight 0.3kg Your browser does not support inline frames or is currently configured not to display inline frames. More info about the DALI protocol
	DDBC300-DALI - DALI HF Ballast Controller • 230V 50/60Hz single phase & neutral supply at 0.1A • 3 DALI control outputs, each supporting a full DALI universe of 64 channels (192 total), including backward channel • 1 x RS485 serial port - DyNet & DMX512 • 1 x AUX programmable dry contact input • Integral 24V 250MA power supply • Dimensions H 86mm x W 209mm x D 66mm • Packed weight - 0.49kg Your browser does not support inline frames or is currently configured not to display inline frames. More info about the DALI protocol
	DDBC320-DALI - DALI HF Ballast Controller • 230V 50/60Hz single phase & neutral supply at 0.1A • 3 DALI control outputs, each supporting a full DALI universe of 64 channels (192 total), including backward channel • 3 x 20A feed through switched circuits for DALI ballast mains supply • 1 x RS485 serial port - DyNet & DMX512 • 1 x AUX programmable dry contact input • Internal DALI bus power supply • Dimensions H 86mm x W 209mm x D 66mm • Packed weight - 0.8kg Your browser does not support inline frames or is currently configured not to display inline frames. More info about the DALI protocol
	DDBC400 - Multipurpose Controller • 230V 50/60Hz single phase supply at 5A • 4 x outputs at 1A, dimmed or switched (module dependant) + 4 x outputs DSI/1-10V Ballast control (fixed module) • DIN Rail enclosure (12 unit) • Will accept 1 x output modules, which is plug in for ease of service • Available output modules include: - 4 x 1A dimmer module (LSDM401) - 4 x 1A relay module (LSRM401) - 1 x 5A dimmer module (LSDM105) - 2 x 3 speed fan controller (LSFCM202) - 4 x DSI/0-10V Ballast module (fixed) • Programmable Logic (8 Tasks) • 365 day time clock with sunrise/sunset & daylight saving functions • 1 x RS485 DyNet serial port • Dimensions H 86mm x W 209mm x D 66mm • Packed weight 0.6kg Your browser does not support inline frames or is currently configured not to display inline frames.
	DDMC802 - Multipurpose Controller • 230V 50/60Hz single phase & neutral supply at 16A • 8 x outputs at 2A, dimmed, switched or HF Ballast (module dependent) • DIN Rail enclosure (12 unit) • Will accept 8 x output modules, which are plug in for ease of service • Available output modules include: - DDLM102 1 x 2A leading edge phase control module, suitable for incandescent lamps and some types of dimmable electronic transformers - DDLM104 1 x 4A leading edge phase control module, suitable for incandescent lamps and some types of dimmable electronic transformers - DDTM102 1 x 2A trailing edge phase control module, suitable for use with most types of dimmable electronic transformers - DDBM100 1 channel ballast module, suitable for controlling DALI (Broadcast mode only), DSI & 1-10V ballasts and transformers (a relay module must be paired with a HF ballast module when controlling 1-10V ballasts) - DDRM104 1 x 4A relay module, suitable for switched loads - DDCM102 1 channel x 2A SPDT curtain control module - DDFM102 1 channel x 400VA fan control module • 1 x RS485 serial port - DyNet & DMX512 • Channel status indicators and override switches (-MO option version only) • Dimensions H 96mm x W 211mm x D 75mm • Packed weight 0.9kg Your browser does not support inline frames or is currently configured not to display inline frames.
	DDBC1200 - HF Ballast Controller • 230V 50/60Hz single phase & neutral supply at 0.5A • 12 control outputs, selectable to DALI (Broadcast mode only), 0-10V or DSI • Output capacity - DALI mode: 80 DALI ballasts per channel, 500 total, 0-10V mode: 100mA sink, 50mA source per channel, DSI: 100 DSI ballasts per channel, 1200 total • 1 x RS485 serial port - DyNet • 1 x AUX programmable dry contact input • Status indicators and override switches (-MO option version only) • Dimensions H 96mm x W 211mm x D 75mm • Packed weight - 0.6kg Your browser does not support inline frames or is currently configured not to display inline frames.
	Wall Mount
	DMC805 - Multipurpose Controller • 230V 50/60Hz single phase & neutral supply at 40A • 4 dimmed outputs at 5A • Dimmed channel rise time >200uS @ 230V • 4 switched outputs at 10A (total switched output load 20A) • Maximum total load 40A • each block of 4 channels protected by a 20A MCB • 4 x control outputs, each selectable to 1-10V or DSI • 1 x RS485 DyNet serial port • Dimensions H 455mm x W 225mm x D 75mm • Packed weight - 5.3kg Your browser does not support inline frames or is currently configured not to display inline frames.
	DBC410 - 1-10V & DSI HF Ballast Controller • 230V 50/60Hz single phase & neutral supply at 40A • 4 switched outputs at 10A • Each output protected by a 10A MCB • 4 x HF ballast control outputs, each selectable to 1-10V or DSI • Programmable Logic Controller • 1 x RS485 DyNet serial port • Dimensions H 320mm x W 225mm x D 75mm • Packed weight - 4.0kg Your browser does not support inline frames or is currently configured not to display inline frames.
	DBC1205 - 1-10V & DSI HF Ballast Controller • 230V 50/60Hz single phase supply at 60A or three phase supply at 20A per phase • 12 switched outputs at 5A • 12 x HF ballast control outputs, each selectable to 1-10V or DSI • Maximum total load 60A • 3 blocks of 4 channels, each protected by a 20A MCB • Programmable Logic Controller • 1 x RS485 DyNet serial port • Dimensions H 455mm x W 225mm x D 75mm • Packed weight - 5.2kg Your browser does not support inline frames or is currently configured not to display inline frames.
	DBC1210 - DALI, DSI & 1-10V HF Ballast Controller • 400/230V ±14% 50/60Hz 3-Phase Y at 40A • 12 switched outputs at 10A • 12 x HF ballast control outputs, each selectable to 1-10V, DALI (Broadcast mode) or DSI • Maximum total load 120A • Output capacity - DALI mode: 64 DALI ballasts per channel, up to a maximum of 400, DSI mode: 100 ballasts per channel, up to a maximum of 1,200, 1-10V mode: 50mA sink/source per channel, DSI: 100 DSI ballasts per channel, 1200 total • Each output protected by a 10A MCB • 1 x RS485 DyNet serial port • 1 x programmable dry contact AUX input • Dynalite Accessory Module Enabled • Dimensions H 457mm x W 252mm x D 126mm • Packed weight - 10.25kg Your browser does not support inline frames or is currently configured not to display inline frames.
	DBC1220 - DALI, DSI & 1-10V & HF Ballast Controller • 400/230V ±14% 50/60Hz 3-Phase Y at 63A • 12 switched outputs at 20A • Maximum total load 180A • 12 x HF ballast control outputs, each selectable to 1-10V, DALI (Broadcast mode) or DSI • Output capacity - DALI mode: 64 DALI ballasts per channel, up to a maximum of 400, DSI mode: 100 ballasts per channel, up to a maximum of 1,200, 1-10V mode: 50mA sink/source per channel, DSI: 100 DSI ballasts per channel, 1200 total • Each output protected by a 20A MCB • 1 x RS485 DyNet serial port • 1 x programmable dry contact AUX input • Dynalite Accessory Module Enabled • Dimensions H 457mm x W 252mm x D 126mm • Packed weight - 10.25kg Your browser does not support inline frames or is currently configured not to display inline frames.