|
P1 - Basic DLight Configuration
This is an introductory training module covering basic programming of a Dynalite lighting control system. This module uses an 8-point plan to provide each participant with the necessary skills to create and commission a scene set lighting control system.
Typical Trainee:
Electrical contractor, AV Integrator, Lighting Designer.
Who will benefit from this training session?
Anyone needing to carry out basic commissioning of a Dynalite control system to provide scene set control for one or more areas of lighting.
Prerequisites:
Participants should have a basic understanding of the principles of operation of the Dynalite system and have basic PC skills. No previous commissioning experience is required.
Equipment required:
As this course contains a number of practical assessments at least one PC notebook using Windows 95 or higher with a serial port is required between two participants. If a participant cannot obtain a PC notebook they should inform the distributor running the course as early as possible.
Course duration:
1 day.
Learning outcomes:
By the end of this session the trainee should be able to:
- Competently use DLight software to set up a Dynalite lighting network to control one or more areas of lighting.
- Follow a logical set up path to efficiently commission a project.
- Program Dynalite control panels to provide individual area preset scene control.
- Modify preset scenes to match the client’s requirement.
- Create an End User document detailing the set up of a project.
Apply for Training
P2 - DLight Introduction to Programming
This course outlines the operations required to create programming scripts. It also looks at a number of specific Dynalite products from a programming perspective.
Typical Trainee:
Electrical contractor, AV Integrator.
Who will benefit from this training session?
Anyone with a good working knowledge of the Dynalite system set up and operation wanting to provide a higher level of control functionality.
Prerequisites:
Participants must have previous experience using DLight software. Previous completion of Training Module P1 (Basic DLight Configuration) or evidence of prior learning is required.
Equipment required:
Each participant is required to bring a PC notebook using Windows 95 or later, to allow installation of the latest version of DLight. The PC will need to have a serial port. All practical exercises are carried out using one computer between two people. If a participant cannot obtain a PC notebook they should inform the distributor running the course as early as possible.
Course duration:
1 day.
Learning outcomes:
By the end of this session the trainee should be able to:
- Competently configure the Universal Sensor for IR, PE and PIR control.
- Create one shot and sequential logic tasks in a Universal Panel.
- Interpret DyNet messages for faultfinding and task creation.
Apply for Training
P3 - DLight Intermediate Programming
This session introduces a number of the more powerful features of the DLight programming system. It also looks at a number of specific Dynalite accessory products from a programming perspective.
Typical Trainee:
Electrical contractor, AV Integrator.
Who will benefit from this training session?
Dynalite Programming Engineers who are looking to further develop their understanding of the DLight software and it’s operation.
Prerequisites:
Participants must have previous experience using DLight software. Completion of Training Modules P1 and P2 (Basic DLight Configuration and DLight Introduction to Programming) or evidence of prior learning is required.
Equipment required:
Each participant is required to bring a PC notebook using Windows 95 or later, to allow installation of the latest version of DLight. The PC will need to have a serial port. All practical exercises are carried out using one computer between two people. If a participant cannot obtain a PC notebook they should inform the distributor running the course as early as possible.
Course duration:
1 day.
Learning outcomes:
By the end of this session the trainee should be able to:
- Design and construct a complete Timeclock task file.
- Configure the DyNet watchdog feature.
- Commission join and area link functionality into a project and understand when to use each method.
- Create pathway lighting using a number of different programming methods.
Apply for Training
P4 - DLight Advanced Integration
This course will enable experienced DLight programming engineers to customise and configure a Dynalite control system to match client’s exact requirements.
Typical Trainee:
Electrical contractor, AV Integrator.
Who will benefit from this training session?
Experienced technicians looking to further improve knowledge and skill levels. Skills learned, such as writing complex tasking programs, are equally suited to residential and commercial projects.
Prerequisites:
Participants must be capable of competently programming a Dynalite lighting control system and creating sequential tasks using a Universal Panel. Prior completion of Training Modules P1, P2 and P3 (Basic DLight Configuration, DLight Introduction to Programming and DLight Intermediate Programming) or evidence of prior learning is required.
Equipment required:
Each participant is required to bring a PC notebook using Windows 95 or higher to allow the latest version of DLight to be installed. The PC must have a serial port. All practical exercises are carried out using a notebook computer. If a participant cannot obtain a PC notebook they should inform the distributor running the course as early as possible.
Course duration:
1 day.
Learning outcomes:
By the end of this session the trainee should be able to:
- Configure a network bridge for any application.
- Create fully functional Tasks using conditional logic.
- Debug complex Tasks.
- Design structured code for efficient operation.
Apply for Training
|
